Name | Polyethylene Polyamine |
Synonyms | Hexyl Dipicrylamine Polyethylene Polyamine Polyethylenepolayamine Hexanitrodiphenylamine Amine, Polyethylenpoly- PolyaMines,polyethylene- Amines, polyethylenepoly- D.E.H. 29 Epoxy Curing Agent amines, polyethylenepoly- HEPA bis-(2,4,6-trinitrophenyl)-amine Polyethylenepolyamine Alkylene polyamine DIPICRYLAMINE (2,2',3',4,4',6-HEXANITRODIPHENYLAMINE) Benzenamine, 2,4,6-trinitro-N-(2,4,6-trinitrophenyl)- DIPICRYLAMINE (2,2',3',4,4',6-HEXANITRODIPHENYLAMINE) |
CAS | 68131-73-7 |
EINECS | 268-626-9 |
Molecular Formula | C12H5N7O12 |
Molar Mass | 439.211 |
Density | 1.014[at 20℃] |
Boling Point | 443℃[at 101 325 Pa] |
Water Solubility | 50g/L at 20℃ |
Vapor Presure | 0.001Pa at 20℃ |
pKa | 9.21[at 20 ℃] |
Physical and Chemical Properties | Red-brown or tan viscous liquid. Strongly alkaline. Density 1.000~1.025g/cm3(20 degrees C). Boiling point> 190 °c (1.33kPa). Melting Point -26 °c. Soluble in water and ethanol, insoluble in benzene and ether. The corresponding salt is formed by the interaction with the acid. Moisture and carbon dioxide are readily absorbed in the air. |
Use | For the preparation of anion exchange resin, ion exchange membrane, crude oil demulsifier, lubricating oil additives. It is also used as an epoxy resin curing agent and a cyanide-free electroplating additive. |
Risk Codes | R21/22 - Harmful in contact with skin and if swallowed. R34 - Causes burns R43 - May cause sensitization by skin contact R50/53 - Very toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment. |
Safety Description | S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S36/37/39 - Wear suitable protective clothing, gloves and eye/face protection. S45 - In case of accident or if you feel unwell, seek medical advice immediately (show the label whenever possible.) S60 - This material and its container must be disposed of as hazardous waste. S61 - Avoid release to the environment. Refer to special instructions / safety data sheets. |
Downstream Products | Polyamide Resin |
This product is an orange-to-tan viscous liquid with an ammonia odor. Soluble in water and ethanol, insoluble in ether, easy to absorb moisture and carbon dioxide in the air, and acid to form the corresponding salt, low temperature will solidify.
This product is ethylenediamine, diethylenetriamine, triethylenetetramine, tetraethylenepentamine joint products. See diethylenetriamine for method of production.
In addition to the solvent, it is mainly used to prepare epoxy resin curing agent, crude oil demulsifier, mining additives, bentonite lubricant, cyanide-free electroplating additives and anion exchange resin. In addition, there is a wide range of applications in the military industry.
see diethylenetriamine.
LogP | -3.67 at 20℃ |
EPA chemical substance information | information provided by: ofmpeb.epa.gov (external link) |
Application | used as curing agent and cable joint used in the preparation of anion exchange resin, ion exchange membrane, crude oil demulsifier, lubricating Oil additives, etc. It is also used as an epoxy resin curing agent and a cyanide-free electroplating additive. adhesive? Pouring and mould? Civil engineering? Composite materials? Marine and protective coatings? Potting and encapsulation |